In mold quoting, material cost typically accounts for 30% to 50% of the total—it is the single largest line item and the one most likely to sink a quote if underestimated. Take a medium-complexity injection mold: the mold base is usually S50C or 45# steel, while cavity and core inserts are selected by production volume—718H for general runs, NAK80 for high-polish or transparent parts, and S136 for corrosive resins or long-life programs. The mistake I still see on the shop floor is quoting steel by finished part weight times unit price. That ignores machining allowance, trial-shot losses, and heat-treatment distortion allowance. A reliable rough rule is to order stock at 1.15 to 1.25 times the finished net weight, with the higher end for deep ribs, tight tolerances, or pre-hardened grades that move during machining.

Mold base sizing deserves its own check. Plate thickness must cover cavity depth plus support and clamping needs, and standard plate increments often push you to the next size up—factor that in before you commit to a number. Insert blocks should be quoted by the actual billet dimensions, not the cavity footprint, since you pay for the whole block. For heat-treated grades like S136, add margin for hardening distortion and possible re-machining; a 1.20 multiplier is realistic here, not 1.15. Also separate material cost from heat treatment and surface treatment in your breakdown, so the customer sees where the money goes and you have room to adjust if steel prices shift mid-project.

And they have shifted. Since 2025, mold steel prices have been volatile, driven by alloying element costs and mill allocation. Put a validity period on the material unit price in your quotation—30 days is common practice—and state that beyond that window, steel cost will be re-confirmed against the current mill price. This one clause prevents most of the post-award arguments I have seen over material surcharges. For more mold sourcing and quoting references, visit MoldSo at www.moldso.com.